Heavy Industrial SPM
Model: NCT-SPM-72
Comprehensive Machine Overview
The Multipurpose Bending Press is a dedicated industrial system engineered by National Cutting Tools for <p>The Multipurpose Bending Press (Horizontal Bending Press) by National Cutting Tools is an adaptable, high-force hydraulic machine tool designed for horizontal bending, punch-forming, tube bending, and straightening of thick steel bars, plates, and structural profiles. Traditional vertical press brakes struggle with thick flat bars and closed-loop bends due to frame obstruction; a horizontal bending press provides an open, flat work bed where heavy workpieces lie flat on the table during bending.</p>.
<p>Featuring a heavy-duty hydraulic cylinder mounted below or flush with the table, the machine drives a hardened bending punch against adjustable V-blocks or rotary bending pins. Exerting up to 40 to 100 metric tons of hydraulic thrust, it handles heavy flat bars up to 200x20 mm, solid square rods, and thick pipes with digital stroke readout for micron-level angular repeatability.</p>
<h3>Key Features</h3>
<ul>
<li><strong>Horizontal Flat Table Configuration:</strong> Open flat table allows bending closed shapes, rings, and long bars without vertical frame interference.</li>
<li><strong>High Hydraulic Bending Force (40–100 Tons):</strong> Massive ram force bends thick steel flats and heavy round bars cold without cracking.</li>
<li><strong>Digital Stroke Readout & Depth Stop:</strong> Precision linear scale and electronic depth control allow setting bend angles with ±0.1 mm repeatability.</li>
<li><strong>Interchangeable Quick-Change Tooling:</strong> Drop-in tool pins allow switching between flat-bar bending, pipe bending, and plate straightening in minutes.</li>
<li><strong>Heavy Solid Steel Table Plate:</strong> Thick flame-cut steel table normalized and surface-ground to withstand massive horizontal bending thrust.</li>
<li><strong>Foot Pedal Control with Inching Mode:</strong> Enables the operator to position and adjust workpieces accurately before full hydraulic tonnage stroke.</li>
</ul>
<h3>Applications</h3>
<ul>
<li>Bending scaffolding brackets, clamp plates, and structural steel clips</li>
<li>Bending thick copper and aluminum busbars for electrical panels</li>
<li>Forming U-bolts, heavy hooks, and structural framing brackets</li>
<li>Straightening warped structural steel bars, beams, and fabricated sections</li>
</ul>
<p>Manufactured at the National Cutting Tools facility in Ludhiana, Punjab. Every press is tested under full hydraulic load on high-tensile flat bar stock before export dispatch.</p>
Engineering Data Matrix
| Technical Parameter | Operational Specification / Value |
|---|---|
| Feature | Specification |
| Type | Hydraulic / Mechanical (model dependent) |
| Tonnage Capacity | 10 – 100 Tons |
| Stroke Length | 100 – 300 mm (adjustable) |
| Working Table Size | Custom sizes available |
| Power Supply | 3 HP – 10 HP (3 Phase) |
| Bending Material | MS, SS, Aluminum, Brass Sheets & Bars |
| Operation | Bending, Punching, Forming, Embossing |
| Machine Weight | 800 – 3000 kg |
| Applications | Fabrication Units, Metal Workshops, Automotive, Industrial Manufacturing |
Multipurpose Bending Press Works QA & Export Packaging Protocol
✓ Hydraulic Ram Tonnage & Bed Flatness Verification
- • Full Tonnage 60-Minute Pressure Hold: Hydraulic cylinder pressurized to 100% rated tonnage and locked for 60 minutes with zero pressure drop on gauge.
- • Platen Parallelism & Deflection Check: Bed-to-ram parallelism calibrated within 0.05 mm under peak central and off-center forming loads.
- • Decompression & Cycle Speed Check: Rapid approach, controlled pressing, and smooth decompression valve timing calibrated to prevent hydraulic shock.
- • Emergency Stop & Safety Circuit Audit: Dual-hand anti-tie-down safety console and light curtain interlocks verified under continuous cycling.
Hydraulic Press Heavy-Duty Export Transit Preparation
- • Main Ram Mechanical Timber Blocking: Solid timber hardwood blocks positioned between ram platen and bed to lock hydraulic cylinder in place.
- • Piston Rod Protective Greasing: Chrome-plated hydraulic piston rod covered in heavy grease and wrapped in heavy-duty poly barrier.
- • Hydraulic Power Pack Sealing: Oil tank breather replaced with hermetic transport plug; directional valves protected against dust.
- • Container Floor Bolting Points: Base frame pre-drilled with heavy-gauge container floor anchoring holes.
International Shipping Destinations & India Supply Network
National Cutting Tools manufactures and configures the Multipurpose Bending Press for seamless integration into international fabrication lines and domestic scaffolding manufacturing plants. All machinery is customized for local electrical grids, certified for regional compliance, and dispatched with seaworthy protective packaging.
Primary International Export Destinations
All Export Hubs →Pan-India Fast Freight Dispatch (Ludhiana Works)
India Directory →Full-truckload (FTL) and part-load freight dispatch directly from our central manufacturing works at Focal Point, Ludhiana. Factory engineers provide on-site leveling, tool alignment, and operator training across all major industrial manufacturing clusters:
Frequently Asked Questions • Multipurpose Bending Press
Direct Factory Machinery Proposal
Connect with our engineering specialists in Ludhiana. Receive comprehensive technical specifications, power requirements, tooling options, and estimated FOB/CIF maritime rates.
Request Formal Quotation
Please provide production requirements for exact tooling design.
Pipe End Forming, Chamfering & Hydraulic Punching Machinery Guide
Technical breakdown covering machine sizing, tooling die setups, cycle speeds, and operational maintenance for Specialized Pipe & Fabrication Machinery.
