Hydraulic Press Machines Manufacturers, Suppliers & Exporters in India

Hydraulic press machines manufactured by National Cutting Tools in Ludhiana, Punjab, deliver robust, controllable tonnage for sheet metal deep drawing, plate punching, pipe end flattening, structural bending, and scaffolding component cold forming. Ranging in capacity from 20 tons up to 500 tons, our hydraulic presses serve automotive component manufacturers, scaffolding production lines, electrical enclosure stampers, and vessel fabricators.

Unlike light mechanical eccentric presses that deliver peak tonnage only at bottom dead center (BDC), hydraulic presses provide full tonnage throughout the entire stroke. This makes them ideal for deep drawing oil pans, forming scaffolding top cups, crimping pipe ends, and performing multi-stage progressive blanking on heavy plate gauges.

High-tonnage hydraulic circuits demand leak-free, fail-safe engineering under continuous industrial duty cycles:

• ✓Honed Hard Chrome Plated Rams: Hydraulic cylinder barrels are micro-honed to a mirror finish, with piston rods made from EN-8/EN-9 forged steel hard-chrome plated to 30 microns for extended seal life.
• ✓Manifold Block Hydraulic Valving: Integrated cartridge valve manifold blocks (Rexroth/Vickers architecture) eliminate external high-pressure piping, preventing vibration-induced oil leaks.
• ✓Operator Safety System: Dual-hand push button safety interlock, photoelectric safety infrared light curtains, and automatic hydraulic anti-drop check valves protect operators.

National Cutting Tools exports hydraulic presses across Saudi Arabia, the UAE, Qatar, Oman, and South-East Asia. Electrical systems comply with SASO 380V 60Hz and international IEC norms. Every press undergoes continuous 4-hour cycle testing with pressure gauge validation and pressure holding tests prior to seaworthy timber crating and dispatch.