Explore manufactured models, engineered capacities, and turnkey tooling assemblies built at our Ludhiana manufacturing works.
Specialized Pipe & Fabrication Machinery
Multi-purpose Scaffolding Machine for tube cutting, swaging, and end preparation in modular scaffolding component fabrication lines. Built by NCT Ludhiana.
Specialized Pipe & Fabrication Machinery
Pipe End Facing Machine for facing, deburring, and squaring pipe ends to ensure perpendicular weld prep. Built at NCT Ludhiana works.
Specialized Pipe & Fabrication Machinery
Beveling Machine for preparing precision V, Y, and J-bevel weld preps on metal plates, pipe ends, and structural components. Built in Ludhiana, Punjab.
Specialized Pipe & Fabrication Machinery
Bar Chamfering Machine for rapid end chamfering, deburring, and centering on round solid steel bars and bolts prior to threading or forging. NCT Ludhiana.
Specialized Pipe & Fabrication Machinery
CNC Round Pipe Hydraulic Punching Machine with servo-driven rotational and linear indexing for automated multi-hole punching in scaffold and structural pipes.
Specialized Pipe & Fabrication Machinery
MIG Welding Machine (GMAW) industrial inverter power source for continuous structural fabrication, scaffolding welding, and heavy engineering works.
Specialized Pipe & Fabrication Machinery
Multipurpose Bending Press for versatile horizontal bending, straightening, punching, and pipe forming in metal fabrication and maintenance workshops.
Specialized Pipe & Fabrication Machinery
Shaping Machine (Metal Shaper) for generating flat surfaces, slots, dovetails, and keyways using single-point reciprocating toolhead. Built in Ludhiana.
Specialized Pipe & Fabrication Machinery
Slotting Machine (Vertical Shaper) for cutting internal keyways, splines, blind-hole slots, and internal gear teeth with rotating indexable table.
Specialized Pipe & Fabrication Machinery
Pipe Beveling Machine for stationary and portable weld prep beveling on steel pipes up to 12" diameter. Produces clean V, Y, and compound bevels.
Specialized Pipe & Fabrication Machinery
Two Roll Hydraulic Thread Rolling Machine for cold-forming precision threads on solid bars, bolts, and jack screws with hydraulic squeeze force.
Specialized Pipe & Fabrication Machinery
Semi Automatic Pipe Cutting Machine with pneumatic/hydraulic vise clamping and automated downfeed for clean, cold saw cut-off of pipes and tubes.
Specialized Pipe & Fabrication Machinery
Three Roll Hydraulic Thread Rolling Machine for precision thread rolling on thin-wall pipes, hollow tubes, and hollow jack screws without tube distortion.
Compare engineering capacities, working dimensions, power ratings, and target manufacturing workflows across our standard product variants.
| Machine Model | Pipe Diameter Range | Wall Thickness | Cycle Time | Total Power | Primary Fabrication Role |
|---|---|---|---|---|---|
| Pipe End Facing & Chamfering Machine | 25 mm – 114 mm | 1.5 – 8.0 mm | 6 – 10 seconds | 3.7 kW Spindle | Square facing, ID/OD weld prep chamfer on scaffolding tubes |
| CNC Round Pipe Hydraulic Puncher | 20 mm – 90 mm | 1.2 – 4.0 mm | 1.5 sec / hole | 5.5 kW Hydraulic | Multi-hole punching on fence posts, greenhouse tubes, props |
| Two-Roll Hydraulic Thread Rolling Machine | 10 mm – 60 mm | Solid / Heavy pipe | 3 – 8 seconds | 7.5 kW + Hydraulic | Continuous tie rods, anchor bolts, ACME scaffolding jack screws |
| Three-Roll Hydraulic Thread Rolling Machine | 20 mm – 100 mm | 1.5 – 6.0 mm (Hollow) | 4 – 10 seconds | 7.5 kW – 11 kW | Rolling threads on hollow scaffolding pipes, conduit, thin sleeves |
| High-Speed Semi-Automatic Pipe Cutter | 25 mm – 150 mm | 1.5 – 6.0 mm | 4 – 8 seconds | 3.7 kW Saw | Burr-free cold saw cutting of scaffolding tubes to exact length |
* Custom center distances, stroke lengths, hydraulic tonnage, or dual-voltage electrics (380V/415V/440V, 50/60 Hz) can be engineered to order upon review of drawing specifications.
Includes dimensional drawings, electrical schematics, shipping crate dimensions, and full model specification tables.
Every machine built at our Ludhiana works is powered up, tooled, and tested on customer material before crating. Watch actual production cycle runs recorded on our assembly floor.
Machine: Three Roll Hydraulic Thread Rolling Machines
Machine: Pipe End Facing Machine
Machine: Bar Chamfering Machine
Specialized pipe machinery manufactured by National Cutting Tools in Ludhiana, Punjab, includes dedicated special-purpose machines (SPMs) engineered for automated pipe end facing, weld beveling, hydraulic hole punching, bar chamfering, pipe slotting, and cold thread rolling. Tubular scaffolding manufacturers, greenhouse structure builders, fence post fabricators, and tubular heat exchanger plants require consistent cycle times and burr-free end preps that manual grinding or conventional machining cannot match.
Our special-purpose pipe machinery replaces multiple manual steps with automated pneumatic or hydraulic clamping and feeding cycles. By synchronizing automatic tube indexing, multi-tooth carbide facing cutterheads, and heavy hydraulic punching presses, NCT pipe machinery cuts tube preparation times to under 10–15 seconds per pipe end with exact length repeatability.
Simultaneously faces the pipe end square and applies inside/outside weld prep chamfers (30°/37.5°) on tubes from 25 mm up to 150 mm diameter in 6 to 10 seconds.
Multi-hole hydraulic punch press with automatic servo-controlled linear tube feed. Punches clean holes through pipe walls without collapsing tube roundness.
High-tonnage hydraulic cold roll forming machines for rolling continuous threads, knurling, and finning on pipes and solid shafts without cutting material away.
Heavy-duty pipe weld bevelers and vertical slotting machines for internal keyways, pipe splines, and structural pipe interlocking joints.
High-volume tubular fabrication lines run millions of cycles annually:
We export specialized pipe machinery across the GCC, Africa, and South-East Asia. Every machine undergoes full functional cycle run-offs on buyer pipe samples, with HD video proof recorded prior to export packaging in ISPM-15 certified timber cases.
Turnkey crating, seaworthy moisture protection, and rapid container dispatch from Mundra Port (INMUN) & Nhava Sheva (INNSA).
Direct container clearance at Jebel Ali Port (AEJEA) and Sharjah Hamriyah. 415V 50Hz electricals, standard 4–6 day ocean transit from Mundra Port.
View UAE Export Profile →Clearance at Dammam (King Abdulaziz Port) & Jeddah Islamic Port. Built with 380V / 220V 60Hz SASO-compliant motors, certified crating, and Saber registry documentation.
View Saudi Arabia Export Profile →Dispatched to Hamad Port (QA HMD), Sohar Port (OM SOH) & Port Klang (MY PKG). 50Hz/60Hz dual-wound, seaworthy crating for rapid customs clearance.
All machinery is built and factory-tested at our Ludhiana works in Punjab, then dispatched by dedicated road freight across India's key industrial clusters.
From our Focal Point manufacturing facility in Ludhiana, our heavy-duty specialized pipe & fabrication machinery are dispatched securely with ISPM-15 compliant timber skids and weather-protective packaging. We ensure door-to-door delivery with verified transit timelines: Delhi-NCR & Jaipur (1–2 days), Ahmedabad & Surat industrial corridors (2–3 days via NH48), Pune auto-ancillary belt & Mumbai metropolitan region (3–4 days), Hyderabad pharma & fabrication parks (3–4 days), and Chennai & Coimbatore manufacturing corridors (4–5 days). Factory acceptance trials (FAT) and on-site commissioning support are provided nationwide by our engineering technicians.
Direct engineering answers regarding cycle speeds, electrical compatibilities, delivery lead times, and factory acceptance testing.
Contact our machine building team in Ludhiana for custom dimensions, cycle specifications, FAT video inspection, or turnkey plant setup proposals.
National Cutting Tools • Ludhiana Works (+91-9888210800)
Type at least two letters to search the catalogue.
