Heavy Industrial SPM
Model: NCT-SPM-62
Comprehensive Machine Overview
The Power Operated Hydraulic Press is a dedicated industrial system engineered by National Cutting Tools for <p>The Power Operated Hydraulic Press by National Cutting Tools is an industrial H-frame press designed for heavy assembly, shaft straightening, bearing pressing, bushing installation, and structural metal forming operations. Hand-operated shop presses lack the steady pressing speed and tonnage required for industrial fabrication; our motorized hydraulic press delivers consistent, regulated pressing force through an electric motor-driven hydraulic power pack.</p>.
<p>Constructed from heavy IS 2062 structural steel plates normalized to eliminate welding stresses, the H-frame structure features an adjustable work bed supported on high-tensile steel pins. The heavy double-acting hydraulic cylinder delivers smooth, controlled pressing force up to rated capacity (30 to 200 tons), controlled via an intuitive manual spool valve or electric push-button pendant.</p>
<h3>Key Features</h3>
<ul>
<li><strong>Heavy Welded H-Frame Chassis:</strong> High-strength structural steel frame resists deflection under full rated tonnage, ensuring parallel pressing.</li>
<li><strong>Motorized Hydraulic Power Pack:</strong> Industrial electric motor and high-pressure radial piston pump deliver smooth, continuous hydraulic flow.</li>
<li><strong>Adjustable Work Bed Height:</strong> Winch-operated bed lifting mechanism allows rapid vertical bed positioning to accommodate tall workpieces.</li>
<li><strong>Double-Acting Hydraulic Cylinder:</strong> Powered advance and powered retract ensure fast cycle times and positive ram return.</li>
<li><strong>Calibrated Pressure Gauge & Relief Valve:</strong> Analog pressure gauge reads in metric tons and bar; adjustable relief valve prevents over-tonnage.</li>
<li><strong>V-Blocks & Flat Pressing Plates:</strong> Includes precision V-blocks for shaft straightening and heavy ground pressure plates for flat pressing.</li>
</ul>
<h3>Applications</h3>
<ul>
<li>Straightening warped structural steel bars, pipes, and scaffolding tubes</li>
<li>Pressing and removing heavy industrial bearings, bushings, and pulleys</li>
<li>Forming and bending steel brackets, clamps, and machinery parts</li>
<li>General maintenance and assembly operations in heavy workshops</li>
</ul>
<p>Manufactured and pressure-tested at our Ludhiana facility. Each press is tested to 125% of rated tonnage with ram travel and pressure holding checks before dispatch.</p>
Engineering Data Matrix
| Technical Parameter | Operational Specification / Value |
|---|---|
| Max Force / Load | 30–60 Ton |
| No. of Cylinder | 1 |
| Body Material | Iron |
| Motor Power | 3 HP |
| Dimensions | 650 × 150 mm |
| Operation Type | Hydraulic |
| Condition | New |
| Application | Industrial and Commercial Projects Use |
| Country of Origin | India |
Power Operated Hydraulic Press Works QA & Export Packaging Protocol
✓ Hydraulic Ram Tonnage & Bed Flatness Verification
- • Full Tonnage 60-Minute Pressure Hold: Hydraulic cylinder pressurized to 100% rated tonnage and locked for 60 minutes with zero pressure drop on gauge.
- • Platen Parallelism & Deflection Check: Bed-to-ram parallelism calibrated within 0.05 mm under peak central and off-center forming loads.
- • Decompression & Cycle Speed Check: Rapid approach, controlled pressing, and smooth decompression valve timing calibrated to prevent hydraulic shock.
- • Emergency Stop & Safety Circuit Audit: Dual-hand anti-tie-down safety console and light curtain interlocks verified under continuous cycling.
Hydraulic Press Heavy-Duty Export Transit Preparation
- • Main Ram Mechanical Timber Blocking: Solid timber hardwood blocks positioned between ram platen and bed to lock hydraulic cylinder in place.
- • Piston Rod Protective Greasing: Chrome-plated hydraulic piston rod covered in heavy grease and wrapped in heavy-duty poly barrier.
- • Hydraulic Power Pack Sealing: Oil tank breather replaced with hermetic transport plug; directional valves protected against dust.
- • Container Floor Bolting Points: Base frame pre-drilled with heavy-gauge container floor anchoring holes.
International Shipping Destinations & India Supply Network
National Cutting Tools manufactures and configures the Power Operated Hydraulic Press for seamless integration into international fabrication lines and domestic scaffolding manufacturing plants. All machinery is customized for local electrical grids, certified for regional compliance, and dispatched with seaworthy protective packaging.
Primary International Export Destinations
All Export Hubs →Pan-India Fast Freight Dispatch (Ludhiana Works)
India Directory →Full-truckload (FTL) and part-load freight dispatch directly from our central manufacturing works at Focal Point, Ludhiana. Factory engineers provide on-site leveling, tool alignment, and operator training across all major industrial manufacturing clusters:
Frequently Asked Questions • Power Operated Hydraulic Press
Direct Factory Machinery Proposal
Connect with our engineering specialists in Ludhiana. Receive comprehensive technical specifications, power requirements, tooling options, and estimated FOB/CIF maritime rates.
Request Formal Quotation
Please provide production requirements for exact tooling design.
C-Frame, H-Frame & Deep Drawing Hydraulic Presses: Tonnage & Sizing Guide
Technical breakdown covering machine sizing, tooling die setups, cycle speeds, and operational maintenance for Hydraulic Press Machines.
