Band Saw Machines for Qatar
National Cutting Tools builds metal-cutting band saws and cold saws that billet tube and bar to length as the first operation in a scaffold or rebar line at its works in Ludhiana, Punjab, and ships them to Doha, Al Wakrah, Mesaieed, Ras Laffan and Lusail through Hamad Port, Doha. The machines produce square-cut tube and bar lengths feeding punching, threading and welding stations, and are built to the geometry and tolerances called up by EN 13898 for metal sawing machine safety. Every consignment for Qatar is built for 415V 50 Hz with Siemens or Schneider protection gear.
Where the demand comes from
Tube billeting is the first operation in any Qatari scaffold or spool line, and sawing capacity is typically the first machine a fabricator adds when moving from assembly to manufacture.
Delivered to: Doha, Al Wakrah, Al Khor, Mesaieed, Ras Laffan, Lusail, Umm Salal
Band Saw Machines available for Qatar
Electrical build
Supply: 415V, 3-phase, 50 Hz. Built for 415V 50 Hz with Siemens or Schneider protection gear.
Shipping & crating
Saws crate compactly; the roller conveyor and length stop are the bulky items and are usually shipped knocked down. Hamad Port receives direct and Jebel Ali-transhipped sailings from Mundra and Nhava Sheva in 6 to 9 days, discharging at Hamad Port, Doha (QAHMD). Machines are crated to ISPM-15 heat-treated standard with desiccant and a vapour barrier, and the packing list, commercial invoice and chamber-attested Certificate of Origin travel with the consignment.
Standards & import documentation
Machines in this class normally clear customs under HS heading 8461.50. Cut squareness and length repeatability are proved across a batch, because downstream weld fit-up depends on the cut, not on the welder. Import clearance in Qatar runs on Qatar General Organisation for Standards and Metrology (QGOSM) requirements, with a legalised Certificate of Origin and manufacturer test certificate per shipment. The works issues the manufacturer test certificate, electrical schematic and material test report with every machine, so the buyer's submittal pack is complete on arrival rather than assembled afterwards.
| Conformity | Qatar General Organisation for Standards and Metrology (QGOSM) requirements; legalised Certificate of Origin and manufacturer test certificate issued with each consignment. |
| Tariff headings | Typical headings: 8515.31 (arc/MIG welding machines), 8459.70 (threading and tapping machines), 8462.29 (press brakes and forming presses), 8461.50 (sawing machines). |
| Port (UN/LOCODE) | Hamad Port, Doha (QAHMD) |
| Incoterms offered | EXW Ludhiana, FOB Mundra / Nhava Sheva, CIF Hamad Port |
Spares & after-sales support
Wear parts for this class are saw blades, blade guides, coolant pumps and the vice clamping cylinders. Qatari plant approval leans on documentation: contractors want the electrical schematic, the motor test certificate and the material test report in the submittal pack. Those are issued as a matter of course, not on request. Spare-part orders are quoted against the machine serial number.