Hydraulic Shearing Machines for Qatar
National Cutting Tools builds hydraulic guillotine shears for cutting plate down to blanks before forming at its works in Ludhiana, Punjab, and ships them to Doha, Al Wakrah, Mesaieed, Ras Laffan and Lusail through Hamad Port, Doha. The machines produce base plate blanks, gussets, cleats and stiffener plate, and are built to the geometry and tolerances called up by EN 13985 for shear safety. Every consignment for Qatar is built for 415V 50 Hz with Siemens or Schneider protection gear.
Where the demand comes from
Plate shearing for base plates, gussets and stiffeners supports both the scaffold trade and the Ras Laffan structural steel scope. Shears are usually bought with a press rather than on their own.
Delivered to: Doha, Al Wakrah, Al Khor, Mesaieed, Ras Laffan, Lusail, Umm Salal
Hydraulic Shearing Machines available for Qatar
Fixed Rake Angle Hydraulic Shearing Machine
- Dimension (L x W x H): 2200 x 1900 x 1900 mm
- Variable Rack Angle (°): 1°
- Strokes Per Minute: 40
Variable Rake Angle Hydraulic Shearing Machine
- Type: Shearing Machine
- Blade Material: High-carbon Steel, Alloy Steel
- Rake Angle Range: 0° – 10°
Electrical build
Supply: 415V, 3-phase, 50 Hz. Built for 415V 50 Hz with Siemens or Schneider protection gear.
Shipping & crating
Shear beds are wide rather than tall; a 2500 mm shear is over-width for a standard container and moves as flat rack, so the freight line item is a real part of the landed cost. Hamad Port receives direct and Jebel Ali-transhipped sailings from Mundra and Nhava Sheva in 6 to 9 days, discharging at Hamad Port, Doha (QAHMD). Machines are crated to ISPM-15 heat-treated standard with desiccant and a vapour barrier, and the packing list, commercial invoice and chamber-attested Certificate of Origin travel with the consignment.
Standards & import documentation
Machines in this class normally clear customs under HS heading 8462.31. Blade clearance is set for the buyer's actual plate thickness and grade, then proved on a cut sample for burr and camber. Import clearance in Qatar runs on Qatar General Organisation for Standards and Metrology (QGOSM) requirements, with a legalised Certificate of Origin and manufacturer test certificate per shipment. The works issues the manufacturer test certificate, electrical schematic and material test report with every machine, so the buyer's submittal pack is complete on arrival rather than assembled afterwards.
| Conformity | Qatar General Organisation for Standards and Metrology (QGOSM) requirements; legalised Certificate of Origin and manufacturer test certificate issued with each consignment. |
| Tariff headings | Typical headings: 8515.31 (arc/MIG welding machines), 8459.70 (threading and tapping machines), 8462.29 (press brakes and forming presses), 8461.50 (sawing machines). |
| Port (UN/LOCODE) | Hamad Port, Doha (QAHMD) |
| Incoterms offered | EXW Ludhiana, FOB Mundra / Nhava Sheva, CIF Hamad Port |
Spares & after-sales support
Wear parts for this class are shear blades, back gauge drive parts, hydraulic seals and the hold-down cylinders. Qatari plant approval leans on documentation: contractors want the electrical schematic, the motor test certificate and the material test report in the submittal pack. Those are issued as a matter of course, not on request. Spare-part orders are quoted against the machine serial number.