Grinding Machines for Qatar
National Cutting Tools builds surface, cylindrical and tool grinding machines used to maintain the dies, rolls and chasers that the production lines consume at its works in Ludhiana, Punjab, and ships them to Doha, Al Wakrah, Mesaieed, Ras Laffan and Lusail through Hamad Port, Doha. The machines produce reground thread rolls, press dies, chaser sets and precision fixture surfaces, and are built to the geometry and tolerances called up by IS 2368 accuracy classes. Every consignment for Qatar is built for 415V 50 Hz with Siemens or Schneider protection gear.
Where the demand comes from
Die and roll regrinding inside Qatar keeps a production line running through the maintenance season, which is the practical argument for this class next to a threading or pressing line.
Delivered to: Doha, Al Wakrah, Al Khor, Mesaieed, Ras Laffan, Lusail, Umm Salal
Grinding Machines available for Qatar
Electric Cylindrical Grinding Machine
- Grinding Wheel Size (Dia x Width x Hole): 355 x 38 x 127 mm
- Coolant Pump Motor (HP): 10
- Driven Type: Electric
Hydraulic Surface Grinding Machine
- Voltage: 230 V
- Spindle Speed: 3600 rpm
- Driven Type: Hydraulic
Manual Surface Grinding Machine
- Grinding Wheel Diameter: 7 Inch
- Spindle Speed: 3600 rpm
- Operation Type: Manual
Universal Cylindrical Grinding Machine
- Centre Height: 130 mm
- Traverse Speed: 50 to 1000 mm/min
- Rapid Approach to All Machines: 50 mm
Cold Saw Grinding Machine
- Type: Cold Saw
- Shape: Rectangular
- Certification: CE Certified
Electrical build
Supply: 415V, 3-phase, 50 Hz. Built for 415V 50 Hz with Siemens or Schneider protection gear.
Shipping & crating
Grinders are shipped with the table locked and the hydraulic reservoir drained; the coolant and magnetic chuck controls crate separately. Hamad Port receives direct and Jebel Ali-transhipped sailings from Mundra and Nhava Sheva in 6 to 9 days, discharging at Hamad Port, Doha (QAHMD). Machines are crated to ISPM-15 heat-treated standard with desiccant and a vapour barrier, and the packing list, commercial invoice and chamber-attested Certificate of Origin travel with the consignment.
Standards & import documentation
Machines in this class normally clear customs under HS heading 8460.19. Acceptance is a surface finish and parallelism test on a ground sample, taken after the machine has been levelled and the wheel dressed. Import clearance in Qatar runs on Qatar General Organisation for Standards and Metrology (QGOSM) requirements, with a legalised Certificate of Origin and manufacturer test certificate per shipment. The works issues the manufacturer test certificate, electrical schematic and material test report with every machine, so the buyer's submittal pack is complete on arrival rather than assembled afterwards.
| Conformity | Qatar General Organisation for Standards and Metrology (QGOSM) requirements; legalised Certificate of Origin and manufacturer test certificate issued with each consignment. |
| Tariff headings | Typical headings: 8515.31 (arc/MIG welding machines), 8459.70 (threading and tapping machines), 8462.29 (press brakes and forming presses), 8461.50 (sawing machines). |
| Port (UN/LOCODE) | Hamad Port, Doha (QAHMD) |
| Incoterms offered | EXW Ludhiana, FOB Mundra / Nhava Sheva, CIF Hamad Port |
Spares & after-sales support
Wear parts for this class are grinding wheels, wheel flanges, hydraulic seals and the magnetic chuck controller. Qatari plant approval leans on documentation: contractors want the electrical schematic, the motor test certificate and the material test report in the submittal pack. Those are issued as a matter of course, not on request. Spare-part orders are quoted against the machine serial number.