Rebar Machine for Qatar
National Cutting Tools builds rebar thread rolling, upsetting and cold forging equipment that prepares bar ends for mechanical splice couplers instead of lapping at its works in Ludhiana, Punjab, and ships them to Doha, Al Wakrah, Mesaieed, Ras Laffan and Lusail through Hamad Port, Doha. The machines produce parallel-thread and taper-thread bar ends from 12 mm to 40 mm, and are built to the geometry and tolerances called up by BS 4449, ASTM A615 and A706 for the bar, and ISO 15835 for the coupler system. Every consignment for Qatar is built for 415V 50 Hz with Siemens or Schneider protection gear.
Where the demand comes from
Lusail and Msheireb vertical construction and the North Field civils both specify mechanical splices in congested cages, and Doha cage prefabrication yards are the buyers for rebar threading capacity.
Delivered to: Doha, Al Wakrah, Al Khor, Mesaieed, Ras Laffan, Lusail, Umm Salal
Rebar Machine available for Qatar
Rebar Thread Cutting Machine
- Machine Type: Thread Cutting
- Material: Cast Iron, Stainless Steel
- Motor Power: 1.5 KW To 5.5 KW
Rebar Cold Forging Machine
- Rated Extrusion Force: 550 KN
- Use: Lifespan 30 Years
- Voltage: 380V
Rebar Coupler
- Model Number: 16 MM TO 40 MM
- Brand Name: NCT
- Material: FOR 500 AND 600 – TATA, SAIL & Other Rebars
Electrical build
Supply: 415V, 3-phase, 50 Hz. Built for 415V 50 Hz with Siemens or Schneider protection gear.
Shipping & crating
Threading and upsetting machines are compact enough for LCL, but the hydraulic power pack and cooling tank are usually crated separately to keep the gross weight per package inside the buyer's forklift rating. Hamad Port receives direct and Jebel Ali-transhipped sailings from Mundra and Nhava Sheva in 6 to 9 days, discharging at Hamad Port, Doha (QAHMD). Machines are crated to ISPM-15 heat-treated standard with desiccant and a vapour barrier, and the packing list, commercial invoice and chamber-attested Certificate of Origin travel with the consignment.
Standards & import documentation
Machines in this class normally clear customs under HS heading 8459.70. Coupler pull-out testing against the specified bar grade is the acceptance criterion, so a sample thread set is rolled and tested before dispatch. Import clearance in Qatar runs on Qatar General Organisation for Standards and Metrology (QGOSM) requirements, with a legalised Certificate of Origin and manufacturer test certificate per shipment. The works issues the manufacturer test certificate, electrical schematic and material test report with every machine, so the buyer's submittal pack is complete on arrival rather than assembled afterwards.
| Conformity | Qatar General Organisation for Standards and Metrology (QGOSM) requirements; legalised Certificate of Origin and manufacturer test certificate issued with each consignment. |
| Tariff headings | Typical headings: 8515.31 (arc/MIG welding machines), 8459.70 (threading and tapping machines), 8462.29 (press brakes and forming presses), 8461.50 (sawing machines). |
| Port (UN/LOCODE) | Hamad Port, Doha (QAHMD) |
| Incoterms offered | EXW Ludhiana, FOB Mundra / Nhava Sheva, CIF Hamad Port |
Spares & after-sales support
Wear parts for this class are thread rolling dies, chaser sets, hydraulic seals and the bar clamping jaws. Qatari plant approval leans on documentation: contractors want the electrical schematic, the motor test certificate and the material test report in the submittal pack. Those are issued as a matter of course, not on request. Spare-part orders are quoted against the machine serial number.