Specialized Pipe & Fabrication Machinery for Qatar
National Cutting Tools builds pipe end facing, beveling, swaging, notching and CNC hydraulic punching machines that prepare tube for welded assembly at its works in Ludhiana, Punjab, and ships them to Doha, Al Wakrah, Mesaieed, Ras Laffan and Lusail through Hamad Port, Doha. The machines produce faced, bevelled, notched and punched tube ends ready for fit-up, and are built to the geometry and tolerances called up by the weld preparation geometry called up by the buyer's WPS, typically to ASME IX or ISO 9692-1. Every consignment for Qatar is built for 415V 50 Hz with Siemens or Schneider protection gear.
Where the demand comes from
North Field LNG expansion spool work at Ras Laffan is the largest single driver of weld preparation machinery in Qatar, and bevel and root face tolerance there is audited rather than assumed. Facing and bevelling machines are set to the buyer's pipe schedule before dispatch.
Delivered to: Doha, Al Wakrah, Al Khor, Mesaieed, Ras Laffan, Lusail, Umm Salal
Specialized Pipe & Fabrication Machinery available for Qatar
Pipe End Facing Machine
- Type: Automatic
- Weight: 100–1000 kg
- Voltage: 380 V
Scaffolding Machine
- Product: Specification / Details
- Type / Model: Mobile Tower Scaffold
- Material: Aluminium Alloy
Beveling Machine
- Type: Portable Beveling Machine
- Weight: 20–60 kg (Model Dependent)
- Voltage: 220–380 V
Bar Chamfering Machine
Specifications
CNC Round Pipe Hydraulic Punching Machine
- Control: CNC Automatic
- Certificate: CE Certified
- Capacity: 45 Holes/min
MIG Welding Machine
- Driven Type: Hydraulic
- Country of Origin: India
- Application: Welding
Multipurpose Bending Press
- Feature: Specification
- Type: Hydraulic / Mechanical (model dependent)
- Tonnage Capacity: 10 – 100 Tons
Shaping Machine
- Feature: Specification
- Length of Ram: 711 – 2108 mm
- Power Supply: 1 – 10 HP
Slotting Machine
- Feature: Specification
- Maximum Stroke Length: 175 mm
- Cross Feed: 225 mm
Pipe Beveling Machine
- Type: Automatic
- Weight: 100–1000 kg
- Voltage: 380V
Two Roll Hydraulic Thread Rolling Machine
- Type: Two Roll Hydraulic Thread Rolling Machine
- Weight: 100 – 1000 Kg
- Color: Grey
Semi Automatic Pipe Cutting Machine
- Drive Motor: 3 H.P., 960 R.P.M.
- Hydraulic Motor: 2 H.P., 1440 R.P.M.
- Coolant Motor: 0.5 H.P.
Three Roll Hydraulic Thread Rolling Machines
- Packaging Type: Wooden Box
- Pressure: Low Pressure
- Usage: Automotive Industry
Electrical build
Supply: 415V, 3-phase, 50 Hz. Built for 415V 50 Hz with Siemens or Schneider protection gear.
Shipping & crating
Most pipe-end machines are single-crate; CNC punching cells ship with the tooling turret packed separately and the hydraulics drained. Hamad Port receives direct and Jebel Ali-transhipped sailings from Mundra and Nhava Sheva in 6 to 9 days, discharging at Hamad Port, Doha (QAHMD). Machines are crated to ISPM-15 heat-treated standard with desiccant and a vapour barrier, and the packing list, commercial invoice and chamber-attested Certificate of Origin travel with the consignment.
Standards & import documentation
Machines in this class normally clear customs under HS heading 8479.89. Bevel angle, land and root face are proved on the buyer's pipe schedule, since weld prep tolerance is what the welding procedure actually depends on. Import clearance in Qatar runs on Qatar General Organisation for Standards and Metrology (QGOSM) requirements, with a legalised Certificate of Origin and manufacturer test certificate per shipment. The works issues the manufacturer test certificate, electrical schematic and material test report with every machine, so the buyer's submittal pack is complete on arrival rather than assembled afterwards.
| Conformity | Qatar General Organisation for Standards and Metrology (QGOSM) requirements; legalised Certificate of Origin and manufacturer test certificate issued with each consignment. |
| Tariff headings | Typical headings: 8515.31 (arc/MIG welding machines), 8459.70 (threading and tapping machines), 8462.29 (press brakes and forming presses), 8461.50 (sawing machines). |
| Port (UN/LOCODE) | Hamad Port, Doha (QAHMD) |
| Incoterms offered | EXW Ludhiana, FOB Mundra / Nhava Sheva, CIF Hamad Port |
Spares & after-sales support
Wear parts for this class are facing and bevelling tool inserts, punch and die sets, hydraulic seals and the pipe clamping jaws. Qatari plant approval leans on documentation: contractors want the electrical schematic, the motor test certificate and the material test report in the submittal pack. Those are issued as a matter of course, not on request. Spare-part orders are quoted against the machine serial number.