Thread Bar Machinery for Qatar
National Cutting Tools builds thread rolling and cutting lines for tie rods, jack screws, anchor bars and formwork accessories at its works in Ludhiana, Punjab, and ships them to Doha, Al Wakrah, Mesaieed, Ras Laffan and Lusail through Hamad Port, Doha. The machines produce Tr and metric rolled threads on solid bar for base jacks, U-head jacks and wall-form tie rods, and are built to the geometry and tolerances called up by ISO 965 tolerance classes, DIN 975 and DIN 976 for the bar itself. Every consignment for Qatar is built for 415V 50 Hz with Siemens or Schneider protection gear.
Where the demand comes from
Formwork tie rods and jack screws are consumable items for the Qatari shoring trade, and the contractors who scaled up for the 2022 programme already have the volume to justify rolling them in-house.
Delivered to: Doha, Al Wakrah, Al Khor, Mesaieed, Ras Laffan, Lusail, Umm Salal
Thread Bar Machinery available for Qatar
Wire Pointing Machine
- Type: Machine
- Material: Mild Steel, Stainless Steel, Aluminum
- Wire Diameter Range: Varies By Model
Wire Drawing Machine
- Type: Machine
- Wire Material: Copper, Steel
- Quality: Best Quality
Wire Straightening And Cutting Machine
- Type: Machine
- Wire Material: Stainless Steel, Copper, And Aluminum
- Cutting Mechanism: Automatic
Wire Straightening Cum Cutting Off Machine
- Feature: Specification
- Wire Material: MS, SS, Copper, Aluminum
- Wire Diameter Capacity: 1 mm – 10 mm (varies by model)
Electrical build
Supply: 415V, 3-phase, 50 Hz. Built for 415V 50 Hz with Siemens or Schneider protection gear.
Shipping & crating
Bar lines are long rather than heavy: the infeed magazine and outfeed conveyor determine container choice, and a 40 ft HC is the usual answer for a full line. Hamad Port receives direct and Jebel Ali-transhipped sailings from Mundra and Nhava Sheva in 6 to 9 days, discharging at Hamad Port, Doha (QAHMD). Machines are crated to ISPM-15 heat-treated standard with desiccant and a vapour barrier, and the packing list, commercial invoice and chamber-attested Certificate of Origin travel with the consignment.
Standards & import documentation
Machines in this class normally clear customs under HS heading 8459.70. Thread class is verified with go/no-go ring gauges on the buyer's bar stock, since rolled thread class depends on the incoming bar diameter tolerance. Import clearance in Qatar runs on Qatar General Organisation for Standards and Metrology (QGOSM) requirements, with a legalised Certificate of Origin and manufacturer test certificate per shipment. The works issues the manufacturer test certificate, electrical schematic and material test report with every machine, so the buyer's submittal pack is complete on arrival rather than assembled afterwards.
| Conformity | Qatar General Organisation for Standards and Metrology (QGOSM) requirements; legalised Certificate of Origin and manufacturer test certificate issued with each consignment. |
| Tariff headings | Typical headings: 8515.31 (arc/MIG welding machines), 8459.70 (threading and tapping machines), 8462.29 (press brakes and forming presses), 8461.50 (sawing machines). |
| Port (UN/LOCODE) | Hamad Port, Doha (QAHMD) |
| Incoterms offered | EXW Ludhiana, FOB Mundra / Nhava Sheva, CIF Hamad Port |
Spares & after-sales support
Wear parts for this class are thread rolls, straightening rollers, feed collets and drive belts. Qatari plant approval leans on documentation: contractors want the electrical schematic, the motor test certificate and the material test report in the submittal pack. Those are issued as a matter of course, not on request. Spare-part orders are quoted against the machine serial number.