Hydraulic Shearing Machines for United Arab Emirates (UAE)
National Cutting Tools builds hydraulic guillotine shears for cutting plate down to blanks before forming at its works in Ludhiana, Punjab, and ships them to Dubai, Abu Dhabi, Sharjah, Ajman and Ras Al Khaimah through Jebel Ali Port, Dubai. The machines produce base plate blanks, gussets, cleats and stiffener plate, and are built to the geometry and tolerances called up by EN 13985 for shear safety. Every consignment for UAE is wound for the 50 Hz Emirates grid and specified for desert ambient temperatures up to 52 C.
Where the demand comes from
Base plate and gusset blanking for the UAE scaffold and structural steel trade needs plate shearing ahead of pressing, and shears are commonly bought alongside a press. Structural fabricators in Ras Al Khaimah and Hamriyah are typical buyers.
Delivered to: Dubai, Abu Dhabi, Sharjah, Ajman, Ras Al Khaimah, Fujairah, Al Ain
Hydraulic Shearing Machines available for United Arab Emirates (UAE)
Fixed Rake Angle Hydraulic Shearing Machine
- Dimension (L x W x H): 2200 x 1900 x 1900 mm
- Variable Rack Angle (°): 1°
- Strokes Per Minute: 40
Variable Rake Angle Hydraulic Shearing Machine
- Type: Shearing Machine
- Blade Material: High-carbon Steel, Alloy Steel
- Rake Angle Range: 0° – 10°
Electrical build
Supply: 380-415V, 3-phase, 50 Hz. Wound for the 50 Hz Emirates grid and specified for desert ambient temperatures up to 52 C.
Shipping & crating
Shear beds are wide rather than tall; a 2500 mm shear is over-width for a standard container and moves as flat rack, so the freight line item is a real part of the landed cost. Sailings from Mundra and Nhava Sheva reach Jebel Ali in 4 to 7 days, discharging at Jebel Ali Port, Dubai (AEJEA). Machines are crated to ISPM-15 heat-treated standard with desiccant and a vapour barrier, and the packing list, commercial invoice and chamber-attested Certificate of Origin travel with the consignment.
Standards & import documentation
Machines in this class normally clear customs under HS heading 8462.31. Blade clearance is set for the buyer's actual plate thickness and grade, then proved on a cut sample for burr and camber. Import clearance in the United Arab Emirates runs on ESMA / ECAS registration, with Emirates Quality Mark documentation where the buyer specifies it. The works issues the manufacturer test certificate, electrical schematic and material test report with every machine, so the buyer's submittal pack is complete on arrival rather than assembled afterwards.
| Conformity | ESMA / ECAS product registration; Emirates Quality Mark where the buyer requires it. Test certificates and electrical schematics supplied with every machine. |
| Tariff headings | Typical headings: 8515.31 (arc/MIG welding machines), 8459.70 (threading and tapping machines), 8462.29 (bending and forming presses), 8479.89 (special purpose machines). |
| Port (UN/LOCODE) | Jebel Ali Port, Dubai (AEJEA) |
| Incoterms offered | EXW Ludhiana, FOB Mundra / Nhava Sheva, CIF Jebel Ali |
Spares & after-sales support
Wear parts for this class are shear blades, back gauge drive parts, hydraulic seals and the hold-down cylinders. Fine airborne sand and 45-52 C summer shade temperatures are the two failure drivers in the Gulf. Motors and control panels are specified for that environment before the machine leaves Ludhiana. Spare-part orders are quoted against the machine serial number.