Hydraulic Press Machines for United Arab Emirates (UAE)
National Cutting Tools builds hydraulic presses for deep drawing, straightening, broaching and assembly pressing at its works in Ludhiana, Punjab, and ships them to Dubai, Abu Dhabi, Sharjah, Ajman and Ras Al Khaimah through Jebel Ali Port, Dubai. The machines produce drawn cups and shells, straightened tube and bar, and pressed assemblies, and are built to the geometry and tolerances called up by EN 693 for hydraulic press safety. Every consignment for UAE is wound for the 50 Hz Emirates grid and specified for desert ambient temperatures up to 52 C.
Where the demand comes from
Straightening imported tube and bar that has taken a set in transit is a routine UAE requirement, and hydraulic presses do that as well as drawing and assembly work. Fabricators handling long imported sections are the usual buyers.
Delivered to: Dubai, Abu Dhabi, Sharjah, Ajman, Ras Al Khaimah, Fujairah, Al Ain
Hydraulic Press Machines available for United Arab Emirates (UAE)
Power Operated Hydraulic Press
- Max Force / Load: 30–60 Ton
- No. of Cylinder: 1
- Body Material: Iron
Electric Hydraulic Press
- Capacity: 5-10 Ton, 10-20 Ton
- Power Source: Electric
- Control Type: CNC
Hand Operated Hydraulic Press
- Operation Type: Hand Operated
- Max Force / Load: 5 – 20 Ton
- Body Material: Heavy Duty Steel
Hydraulic Brake Press
- Max Force or Load: 30 – 60 Ton
- Max Sheet Width: 3 Meter
- Control Type: CNC
Double Action Deep Drawing Hydraulic Press
- Total Capacity: 115 – 750 Ton
- Blank Holder: 40 – 250 Ton
- Bed Size: 600 x 600 – 1300 x 2200 mm
Electrical build
Supply: 380-415V, 3-phase, 50 Hz. Wound for the 50 Hz Emirates grid and specified for desert ambient temperatures up to 52 C.
Shipping & crating
The power pack, accumulator and press frame are separated for shipping and re-piped on site; hydraulic oil is never shipped in the machine. Sailings from Mundra and Nhava Sheva reach Jebel Ali in 4 to 7 days, discharging at Jebel Ali Port, Dubai (AEJEA). Machines are crated to ISPM-15 heat-treated standard with desiccant and a vapour barrier, and the packing list, commercial invoice and chamber-attested Certificate of Origin travel with the consignment.
Standards & import documentation
Machines in this class normally clear customs under HS heading 8462.29. Pressure, dwell and return-speed settings are proved against the buyer's part, and the relief valve is sealed at the certified pressure. Import clearance in the United Arab Emirates runs on ESMA / ECAS registration, with Emirates Quality Mark documentation where the buyer specifies it. The works issues the manufacturer test certificate, electrical schematic and material test report with every machine, so the buyer's submittal pack is complete on arrival rather than assembled afterwards.
| Conformity | ESMA / ECAS product registration; Emirates Quality Mark where the buyer requires it. Test certificates and electrical schematics supplied with every machine. |
| Tariff headings | Typical headings: 8515.31 (arc/MIG welding machines), 8459.70 (threading and tapping machines), 8462.29 (bending and forming presses), 8479.89 (special purpose machines). |
| Port (UN/LOCODE) | Jebel Ali Port, Dubai (AEJEA) |
| Incoterms offered | EXW Ludhiana, FOB Mundra / Nhava Sheva, CIF Jebel Ali |
Spares & after-sales support
Wear parts for this class are cylinder seal kits, pump cartridges, proportional valves and pressure transducers. Fine airborne sand and 45-52 C summer shade temperatures are the two failure drivers in the Gulf. Motors and control panels are specified for that environment before the machine leaves Ludhiana. Spare-part orders are quoted against the machine serial number.