Thread Bar Machinery for United Arab Emirates (UAE)
National Cutting Tools builds thread rolling and cutting lines for tie rods, jack screws, anchor bars and formwork accessories at its works in Ludhiana, Punjab, and ships them to Dubai, Abu Dhabi, Sharjah, Ajman and Ras Al Khaimah through Jebel Ali Port, Dubai. The machines produce Tr and metric rolled threads on solid bar for base jacks, U-head jacks and wall-form tie rods, and are built to the geometry and tolerances called up by ISO 965 tolerance classes, DIN 975 and DIN 976 for the bar itself. Every consignment for UAE is wound for the 50 Hz Emirates grid and specified for desert ambient temperatures up to 52 C.
Where the demand comes from
Formwork and shoring hire companies in the Emirates consume tie rods and jack screws as wear items, and importing them finished carries both freight cost and lead time. Rolling them in-house from imported bar is the usual economic argument for this equipment in the UAE.
Delivered to: Dubai, Abu Dhabi, Sharjah, Ajman, Ras Al Khaimah, Fujairah, Al Ain
Thread Bar Machinery available for United Arab Emirates (UAE)
Wire Pointing Machine
- Type: Machine
- Material: Mild Steel, Stainless Steel, Aluminum
- Wire Diameter Range: Varies By Model
Wire Drawing Machine
- Type: Machine
- Wire Material: Copper, Steel
- Quality: Best Quality
Wire Straightening And Cutting Machine
- Type: Machine
- Wire Material: Stainless Steel, Copper, And Aluminum
- Cutting Mechanism: Automatic
Wire Straightening Cum Cutting Off Machine
- Feature: Specification
- Wire Material: MS, SS, Copper, Aluminum
- Wire Diameter Capacity: 1 mm – 10 mm (varies by model)
Electrical build
Supply: 380-415V, 3-phase, 50 Hz. Wound for the 50 Hz Emirates grid and specified for desert ambient temperatures up to 52 C.
Shipping & crating
Bar lines are long rather than heavy: the infeed magazine and outfeed conveyor determine container choice, and a 40 ft HC is the usual answer for a full line. Sailings from Mundra and Nhava Sheva reach Jebel Ali in 4 to 7 days, discharging at Jebel Ali Port, Dubai (AEJEA). Machines are crated to ISPM-15 heat-treated standard with desiccant and a vapour barrier, and the packing list, commercial invoice and chamber-attested Certificate of Origin travel with the consignment.
Standards & import documentation
Machines in this class normally clear customs under HS heading 8459.70. Thread class is verified with go/no-go ring gauges on the buyer's bar stock, since rolled thread class depends on the incoming bar diameter tolerance. Import clearance in the United Arab Emirates runs on ESMA / ECAS registration, with Emirates Quality Mark documentation where the buyer specifies it. The works issues the manufacturer test certificate, electrical schematic and material test report with every machine, so the buyer's submittal pack is complete on arrival rather than assembled afterwards.
| Conformity | ESMA / ECAS product registration; Emirates Quality Mark where the buyer requires it. Test certificates and electrical schematics supplied with every machine. |
| Tariff headings | Typical headings: 8515.31 (arc/MIG welding machines), 8459.70 (threading and tapping machines), 8462.29 (bending and forming presses), 8479.89 (special purpose machines). |
| Port (UN/LOCODE) | Jebel Ali Port, Dubai (AEJEA) |
| Incoterms offered | EXW Ludhiana, FOB Mundra / Nhava Sheva, CIF Jebel Ali |
Spares & after-sales support
Wear parts for this class are thread rolls, straightening rollers, feed collets and drive belts. Fine airborne sand and 45-52 C summer shade temperatures are the two failure drivers in the Gulf. Motors and control panels are specified for that environment before the machine leaves Ludhiana. Spare-part orders are quoted against the machine serial number.