Lathe Machines for United Arab Emirates (UAE)
National Cutting Tools builds all-geared heavy-duty lathes for turning shafts, spindles, couplers and repair work on scaffold and rebar tooling at its works in Ludhiana, Punjab, and ships them to Dubai, Abu Dhabi, Sharjah, Ajman and Ras Al Khaimah through Jebel Ali Port, Dubai. The machines produce turned couplers, jack nuts, spindle repairs and die blanks, and are built to the geometry and tolerances called up by IS 1878 and DIN 8605 accuracy classes. Every consignment for UAE is wound for the 50 Hz Emirates grid and specified for desert ambient temperatures up to 52 C.
Where the demand comes from
Turning capacity in the Emirates is driven by maintenance rather than production: repairing spindles, jack nuts and tooling locally is far faster than sending them out of the country. Workshop clusters in Al Quoz and Mussafah are the main market.
Delivered to: Dubai, Abu Dhabi, Sharjah, Ajman, Ras Al Khaimah, Fujairah, Al Ain
Lathe Machines available for United Arab Emirates (UAE)
Heavy Duty Lathe Machine
- Automation Grade: CNC
- Max Swing Over Bed: 500 – 750 mm
- Max Turning Diameter: 1000 – 1500 mm
Planner Type Bed Lathe Machine
- Max Swing Over Bed: 750 – 1000 mm
- Max Spindle Speed: 2000 – 3000 RPM
- Max Turning Diameter: 500 – 1000 mm
Medium Duty Lathe Machine
- Automation Grade: CNC
- Max Swing Over Bed: 750 – 1000 mm
- Height of Centre: 216 mm
Semi Automatic Lathe Machine
- Height of Centre: 500 mm
- Swing over Cross Slide: 500 mm
- Swing Over Bed: 980 mm
Horizontal Geared Lathe Machine
- Lathe Machine Type: Horizontal Lathe
- Swing Over Bed: 350 – 800 mm
- Swing Over Cross Slide: 200 – 530 mm
Electrical build
Supply: 380-415V, 3-phase, 50 Hz. Wound for the 50 Hz Emirates grid and specified for desert ambient temperatures up to 52 C.
Shipping & crating
Bed length drives the container decision; a 3 metre bed lathe fits a 40 ft, longer beds go flat rack. The machine must be levelled on grout pads before the first cut. Sailings from Mundra and Nhava Sheva reach Jebel Ali in 4 to 7 days, discharging at Jebel Ali Port, Dubai (AEJEA). Machines are crated to ISPM-15 heat-treated standard with desiccant and a vapour barrier, and the packing list, commercial invoice and chamber-attested Certificate of Origin travel with the consignment.
Standards & import documentation
Machines in this class normally clear customs under HS heading 8458.11. Geometric acceptance is a levelling, taper and roundness test cut, which is why the foundation drawing is issued with the order confirmation rather than at dispatch. Import clearance in the United Arab Emirates runs on ESMA / ECAS registration, with Emirates Quality Mark documentation where the buyer specifies it. The works issues the manufacturer test certificate, electrical schematic and material test report with every machine, so the buyer's submittal pack is complete on arrival rather than assembled afterwards.
| Conformity | ESMA / ECAS product registration; Emirates Quality Mark where the buyer requires it. Test certificates and electrical schematics supplied with every machine. |
| Tariff headings | Typical headings: 8515.31 (arc/MIG welding machines), 8459.70 (threading and tapping machines), 8462.29 (bending and forming presses), 8479.89 (special purpose machines). |
| Port (UN/LOCODE) | Jebel Ali Port, Dubai (AEJEA) |
| Incoterms offered | EXW Ludhiana, FOB Mundra / Nhava Sheva, CIF Jebel Ali |
Spares & after-sales support
Wear parts for this class are headstock bearings, feed gears, lead screws and the chuck jaw sets. Fine airborne sand and 45-52 C summer shade temperatures are the two failure drivers in the Gulf. Motors and control panels are specified for that environment before the machine leaves Ludhiana. Spare-part orders are quoted against the machine serial number.